Atmega-8 based Development Board for Robotics & Embedded

In series of development boards,now i am presenting smallest controller of mega series i.e. Atmega-8.

This controller comes handy in case of small product development or in workshops either on robotics or embedded.This particular board has been developed keeping in mind requirements of Robotics.
(Fig: Atmega8-DIY-Silkscreen)          

Quick-fire DIY Kit

Atmega-32 based Development Board

Its prominent features are:

1. Micro-controller: Atmega8(with ext. crystal,if required )
2.  Communication Protocols : Serial-RS232 communication
3. Power Supply : Battery(6V) / Adapter 6-12V
4. I/O :
1.  4 ADC channels for interfacing maximum  4 different sensors at a time
2. 2 Tact switches for i/p
3.  Two Motor driver(L293D) used for driving at-least 4 DC motors simultaneously or 2 Stepper Motor at a time with 3mm indicator LED for indicating left or right motion.
4. Two O/p point with indicator LED for 12V driving capability 
5. Indicator LED(ON/OFF)
6. Connection for Servo Motor(Max 4 servos if  sensors are not used)  

Some snap shots:

(Fig: Atmega8-DIY-Top)

            Fig: Atmega8-DIY-Bottom)

Usability: This  development board can be used for different applications as

   A : In ROBOTICS projects

   B : In EMBEDDED projects

   C : In any Automation projects as a dummy or test bench for further development 

If any one interested can contact us for the Schematics, Board and Gerber files and sample programs.